
Front Door Security
See who’s there, secure every way in, and let your home respond to every arrival.

See who’s there, secure every way in, and let your home respond to every arrival.
See visitors, get alerts, and unlock without keys.

Monitor visitors and entry points with smart automations.

Protect every entrance and the areas beyond your front door.


Keep watch over the outdoor spaces that matter, with clear views, smarter alerts, and coverage where it matters most.
See your front door and key outdoor areas anytime.

Cover every side of your home with fewer blind spots.

Extend connected camera coverage across larger outdoor areas.


Stay connected to the people and pets you care about, with indoor awareness that balances visibility and privacy.
Check in on family or pets across two rooms.

Stay aware indoors without putting cameras everywhere.

Monitor shared spaces, private rooms, and entry points.


Control comfort from anywhere and let each room adjust to how it’s actually being used.
Control your home’s temperature from anywhere.

Keep occupied rooms comfortable and empty rooms efficient.

Automate comfort for every room based on real-time conditions.


Reduce everyday energy waste by matching power and climate to when—and where—they’re actually needed.
Automate devices to reduce everyday energy waste.

Save energy with occupancy-based climate control.

Coordinate climate and devices for whole-home energy savings.


See who’s there, secure every way in, and let your home respond to every arrival.
See visitors, get alerts, and unlock without keys.

Monitor visitors and entry points with smart automations.

Protect every entrance and the areas beyond your front door.


Keep watch over the outdoor spaces that matter, with clear views, smarter alerts, and coverage where it matters most.
See your front door and key outdoor areas anytime.

Cover every side of your home with fewer blind spots.

Extend connected camera coverage across larger outdoor areas.


Stay connected to the people and pets you care about, with indoor awareness that balances visibility and privacy.
Check in on family or pets across two rooms.

Stay aware indoors without putting cameras everywhere.

Monitor shared spaces, private rooms, and entry points.


Control comfort from anywhere and let each room adjust to how it’s actually being used.
Control your home’s temperature from anywhere.

Keep occupied rooms comfortable and empty rooms efficient.

Automate comfort for every room based on real-time conditions.


Reduce everyday energy waste by matching power and climate to when—and where—they’re actually needed.
Automate devices to reduce everyday energy waste.

Save energy with occupancy-based climate control.

Coordinate climate and devices for whole-home energy savings.

Fast Shipping
30-Day Money-Back Guarantee
Hassle-Free Warranty
Lifetime Customer Support
Vibration Sensor
$29.99
Earn points with this purchase
I love these little sensors!Aqara makes awesome sensors but I owe my sanity to this little guy.I have this and all my aqara sensors connected through a zigbee conbee USB adapter to my Home Assistant server running on an Rpi 3. It has been connected for 2 years on a single battery.My goal for this sensor was to count the amount of time my cats self scooping litter box cycles and trigger a notification after so many scoops. Installation was as easy as using the included sticky pad and it hasn't ever fallen off. I trigger my automation off of the "tilt" entity and it hasn't failed me yet.I can't recommend these sensor enough for anyone looking for seemless home automation integration.
Brought the Aqara vibration sensor along with an E1 hub and was able to get notifications on dryer cycle completion seamlessly! Had gone through multiple forums which talked about IFTTT automations, coding etc… but the capability is within the Aqara App itself. Just set the automation inside the Aqara app to send notification with a 5 minute delay. Vibration is measured by the sensor every minute. Once the dryer starts, the automation notification will be sent out 5 mins after the last vibration is detected! See attached picture. Note, You might get another notification when removing clothes from the dryer of course :)Easy way to convert your standard washing machine/dryer to a smart one. Got the sensor and hub for $35 during prime day sale.Update: A 10 min delay ( instead of 5 mins) to automation worked better!
This unit paired perfectly with Home Assistant thru a Sonoff Zigbee co-ordinator
Does it detect motion yes. Does it detect the angle lf the device? A little bit, we can get it cia home assistant but not easily or consistently enough to use it as a garage door tilt sensor. There are other uses I can see for this device, but it did not meet the need I anticipated using it for.
I bought this product to detect when I hit my center console and then run an automation. The vibration sensor in the device works well (my table is about 1/2 an inch thick). No connection issues, my 2nd aqara device through Zigbee. All you do is click the button while searching for Zigbee devices and it pops up almost instantly just like any other Zigbee device.Do note that the vibration is detected like a motion sensor. In HA it has an IAS zone just like the SmartThings motion sensor and stays on for a few seconds making it so you can only use the vibration every half a minute or so.
This works nice with Home Assistant Snoff Zigbee Dongle. The only thing its missing is the back of the sensor be magnet so I can install this without the two side it tape. Other then that it work better then other sensor I purchased. I hope the battery last longer than other sensors.
If you want to adjust sensitivity you need the Aqara app and a hub - apart from that, it works well. You have to play with placement and tweak settings a bit for your use case. I have this on my dryer to notify me when it has finished.
Having a hub is a must in order for this to work accordingly.I attached this vibration sensor to a set of buttons that our dog uses when he is hungry, wants to play or needs to go potty.I attached it with Velcro to the potty button so everyone at home can get notification on our mobile phones.It works well. Once in a while there are false notifications, but it is rare.
I love these little sensors!Aqara makes awesome sensors but I owe my sanity to this little guy.I have this and all my aqara sensors connected through a zigbee conbee USB adapter to my Home Assistant server running on an Rpi 3. It has been connected for 2 years on a single battery.My goal for this sensor was to count the amount of time my cats self scooping litter box cycles and trigger a notification after so many scoops. Installation was as easy as using the included sticky pad and it hasn't ever fallen off. I trigger my automation off of the "tilt" entity and it hasn't failed me yet.I can't recommend these sensor enough for anyone looking for seemless home automation integration.
Brought the Aqara vibration sensor along with an E1 hub and was able to get notifications on dryer cycle completion seamlessly! Had gone through multiple forums which talked about IFTTT automations, coding etc… but the capability is within the Aqara App itself. Just set the automation inside the Aqara app to send notification with a 5 minute delay. Vibration is measured by the sensor every minute. Once the dryer starts, the automation notification will be sent out 5 mins after the last vibration is detected! See attached picture. Note, You might get another notification when removing clothes from the dryer of course :)Easy way to convert your standard washing machine/dryer to a smart one. Got the sensor and hub for $35 during prime day sale.Update: A 10 min delay ( instead of 5 mins) to automation worked better!
This unit paired perfectly with Home Assistant thru a Sonoff Zigbee co-ordinator
Does it detect motion yes. Does it detect the angle lf the device? A little bit, we can get it cia home assistant but not easily or consistently enough to use it as a garage door tilt sensor. There are other uses I can see for this device, but it did not meet the need I anticipated using it for.
I bought this product to detect when I hit my center console and then run an automation. The vibration sensor in the device works well (my table is about 1/2 an inch thick). No connection issues, my 2nd aqara device through Zigbee. All you do is click the button while searching for Zigbee devices and it pops up almost instantly just like any other Zigbee device.Do note that the vibration is detected like a motion sensor. In HA it has an IAS zone just like the SmartThings motion sensor and stays on for a few seconds making it so you can only use the vibration every half a minute or so.
This works nice with Home Assistant Snoff Zigbee Dongle. The only thing its missing is the back of the sensor be magnet so I can install this without the two side it tape. Other then that it work better then other sensor I purchased. I hope the battery last longer than other sensors.
If you want to adjust sensitivity you need the Aqara app and a hub - apart from that, it works well. You have to play with placement and tweak settings a bit for your use case. I have this on my dryer to notify me when it has finished.
Having a hub is a must in order for this to work accordingly.I attached this vibration sensor to a set of buttons that our dog uses when he is hungry, wants to play or needs to go potty.I attached it with Velcro to the potty button so everyone at home can get notification on our mobile phones.It works well. Once in a while there are false notifications, but it is rare.
I put in my mailbox to detect door opening/closing. I do get some false positives. When opening the mailbox at night, I it turns on the porch light for one minute . This allows me to easily open my door with my key.
Just for fun, I added one of these to my glass slider that has a window/door sensor. It always picks up the door opening and closing, no matter how slowly I do it and it will pick up a glass break, so better than the door/window switch sensors. Switching over to all vibration sensors. Can't wait for a big earthquake, phone is going to blow up with alerts.
I think it could do more with automation but that also could be because I don't know how to use the app to its fullest.
I added this sensor to the inside of my mailbox so I can be alerted when the mail is delivered. There are a lot of applications to be notified when there is vibration. Great product.
Great product
Using a Conbee II USB zigbee adapter, I was able to immediately add this sensor to Home Assistant without any hassle.Would recommend
I got this to set up in Home Assistant to notify me when the dryer is finished. I had seen mixed reviews on this being sensitive enough to work this way, but figured I'd give it a shot. First, I had issues getting Home Assistant ZHA to recognize the device. I had to press and hold the connect button until the lights blinked and then repeatedly press the button every 1 second before the device was identified by ZHA. Then I found instructions online via a quick google search on how to adjust the sensitivity with a manufacturer override code. The device is now very sensitive and is working perfectly.
Had a use-case for a vibration detector that would integrate with Apple HomeKit. It works great! I've been using a few Aqara products over the last year or two and I've been very happy with them.I'm thinking of other uses/automations I can experiment with using additional vibration detectors. In some cases this will do the job of a bulkier/pricier motion detector.
Stuck this to my dryer and connected it to Home Assistant. It's been connected for a few months now and it still has battery. So far the integration has worked without any issues.
Used for my dry to send me an alert when the clothes are done drying. This works great and has a very long battery life.
Pleased with purchase. Product as described
The whole idea of a vibration sensor is 2 tell U when it stops shaking, (washer, dryer, & dish washer), except t app only tells when the machine starts. However Aqara hub will port the sensor to Alexa, & Alexa routine will detect when it no longer detects vibration, then tell U that 'Laundry is Done', which is exactly what I wanted. It takes a few day 4 Aqara 2 sync up w/ Alexa
Works well with HS4/Sonoff ZBDongle-E Zigbee 3.0 USB Dongle Plus and the ZigBee Plus Plugin. Only using the XYZ Tilt reporting for garage door Open/Close
I purchased two. These work great and are an acceptable price. They are not fully functional in Alexa routines. I used these to tell me when my washer and dryer completed their cycle. I didn’t purchase the feature on the machines when I purchased them 14 years ago.
I purchased two. These work great and are an acceptable price. They are not fully functional in Alexa routines. I used these to tell me when my washer and dryer completed their cycle. I didn’t purchase the feature on the machines when I purchased them 14 years ago.
I like it
this little sensor is perfect for the mailbox. No issues with setup, it paired nicely to my aqara hub - i later moved it to hubitat which worked fine too. Aqara really needs better alexa integration. For the price though it's been solid, and alexa announces to the household when the mail has arrived
I use this with my Hubitat smart home hub. It connected just fine after I installed an Aqara integration from the Hubitat Community. Unit reports all functionality with no issues. I am using it to alert me when my washer cycle is complete, and it works fine.
it’s a good zigbee sensor. all of aqaras stuff is good. i do wish the sensitivity of the sensor was adjustable (it probably is i remember reading something about it). but i had to put it on the drum of the dryer (gorilla double sided tape is amazing). i am using it in home assistant and it works as advertised.
So the product itself is cool. It’s small, easy to add to home assistant, registers vibration fairly quickly, and doesn’t bring the ere of my wife.Actually size wise it’s very similar to the aqara temperature sensor. And if like me you break the back of it, you’ll find that the temperature sensor back fits :)But make sure the idea you have for this is better than mine. I wanted to use it under a step of the stair case to switch on a led light strip. Super cool right? Well super fun to setup right? Well it would have been awesome except the sensor wasn’t sensitive enough to pick up me stepping on the step. The steps were wood, the sensor was underneath, and I’m around 200lbs. And no luck.I feel that these might be more suitable for things that rattle or have a bit more shake in them. Stop thinking of weird automation for your bed!
So the product itself is cool. It’s small, easy to add to home assistant, registers vibration fairly quickly
No me ha funcionado para lo que lo quería, avisarme cuando se denmtenga la secadora, pero lo he reciclado y ahora detecta perfectamente en la puerta de entrada movimientos y golpes
Free Shipping
Complimentary delivery on eligible orders.
Easy Returns
30 days to make sure it's the right fit.
Worry-Free Coverage
Protected by a one-year limited warranty.
Here to Help
Expert support before and after purchase.
Aqara Store Membership: Earn, Save, Unlock.
Earn points with every order. Redeem rewards when you want.
Fitted mine today , works perfectly with my lift to latch multipoint lock , finger print entry is perfect for my 91yo father , no more losing keys or forgetting to lock the door
Love it! Installation was ridiculously easy, clean and straightforward.
No faffing about, no unnecessary complications. Everything just makes sense. It's so intuitive to use that even your granny could figure it out without instructions! Exactly how smart home technology should be. Brilliant bit of kit! 👌
It’s a really cool device, responds well and it allows you to not only use it on a door, but also inside drawers and more. 10/10
Increíble fluidez y integración con el sistema HomeKit tengo cinco cámaras y las cinco funciones perfectamente tengo pensado adquirir más
Vanne de grande qualité, reçue rapidement, ultra silencieuse.
Une fois bien configurée, c'est la tranquilité.
I’ve been using this door lock for the past couple of weeks and it has been flawless. It’s so easy to install and setup with Apple home key. It is quick to unlock and because I have and Apple TV 4K that works as a thread border router I can even unlock it remotely. The build quality is top notch and solid. This is the smart lock I e been waiting for.
Been running these for over 2 years now, and I have about 7 up and running in an Apple Home environment. Superb devices only now potentially being replaced by the FP400 which brings Matter support.
replaced another brand, as i needed WPA3 support. I found it very stable about a year of continuous use, reliable Apple HomeKit support. Magnetic stand is useful, not power hungry for backup battery. Doesn't get much hot. Just the app could be better, I just use one button "Enable movement detection" or disable it, and have to navigate several sub menus just to fins this button. Or at least allow us to put a favourite function in the App start! Anyway excellent brand.