Aqara Dual Relay Module T2

$46.99 CAD Sale Save

[Homekit and Matter Support] With an Aqara Zigbee 3.0 hub (Excluding the Camera Hub G2H or hubs from other brand) (*Note: Please ensure that the hub is updated to the latest firmware version.), the Dual Relay Module T2 is compatible with a variety of mainstream ecosystems, like Matter (A Matter compatible Aqara hub is required), Apple HomeKit, Alexa, IFTTT as well as the Aqara Home app, allowing it to be easily integrated into a wide range of smart home setups and used in smart home automation.

[Proximity]For a sturdy connection, ensure that the Aqara Dual Relay Module T2 is within 400 inches of the Aqara Zigbee hub, and the hub is within the same range from the Wi-Fi router. Additionally, make sure the hub and the router are on the same local area network (LAN). *Note: Requires a secured 2.4 gigahertz Wi-Fi network connection for Hub M2/ M1S/ E1/M1S Gen2 and Camera Hub G2H Pro, and 2.4/ 5 GHz Wi-Fi for Camera Hub G3.(Wired connection via Ethernet RJ45 for Hub M2 is also supported).
[Dry Contact Mode] The Aqara Dual Relay Module T2 supports dry (or potential-free) contact mode with both pulse and on-off switching, which allows you to integrate a great variety of electrical devices such as boilers, garage doors and much more into your smart home setup. (*Note: Neutral wire is required.)
[Wireless Switch Mode & Interlock for Motor Control] The T2 offers easy and secure control of tubular motors, and can also function as a roller shade switch. Additionally, with the Wireless Switch Mode, the T2 can turn an existing wall switch into a scene controller without requiring any wiring changes. For example, a button can be designated for arming your wired doorbell or security system. This feature also allows integration of other wired sensors into your smart automations (AC only).
[Energy Saving & Power off Memory] Integrating advanced energy monitoring, the T2 can ensure you maintain optimal control over your energy consumption. (Note: The energy monitoring feature is only available in wet contact mode). Thanks to the Zigbee protocol, the T2 features ultra lower idle power consumption compared to Wi-Fi relays, leading to reduced energy costs. Additionally, equipped with a power-off memory function, the T2 retains its last state even after power interruptions.
[Electrical Safety & Flexible Installation] The T2 supports overheat protection, overload protection and a customizable power limit that automatically shuts off the device if consumption exceeds your specified settings, directly safeguarding your home and your energy footprint. Also, the T2 can be installed near a light, behind a switch* or wall outlet and even includes a DIN rail mount. 

Compatible with:
Aqara
Aqara
Apple Home
Apple Home
Alexa
Alexa
Google Home
Google Home
IFTTT
IFTTT
View full details

Dual Relay Module T2

Live smart without replacing your original equipment.

Banner Image

Features

Dry Contact Mode

Versatile dry contact mode will let you integrate a whole variety of devices into your smart home.

HomeKit and Matter over Bridge Support

The T2 connects to Aqara Zigbee 3.0 hub supporting popular ecosystems: Matter, HomeKit, Google Home, Alexa, and more.*

Interlock and Motor Control

Thanks to the Interlock mode**, the T2 can also be used as a Roller Shade Switch. Let the morning sunshine gently wake you up and start your day.

Energy Monitoring and Power Memory

The T2 incorporates advanced energy monitoring*** and Power Memory for optimal energy control and uninterrupted operation.

Enhanced Safety and Security

Enjoy peace of mind with T2's smart safety features: overheat/overload protection and customizable power limit.****

Wireless Switch Mode

Converting to wireless switch mode is supported. Thanks to it, the T2 will be able to make an existing wall switch a scene controller and even connect to wired sensors***.

Multiple Installation Methods

The T2 can be installed near the light, behind the switch and even DIN rail mount, making it easy to install in electrical cabinets and other confined spaces*****.

Small Size and Versatile Design

Share details about your shipping policies, item returns, or customer service.The versatile design fits round EU wall boxes and other configurations like 86 mm and US-type, enabling usage as a light switch or even behind a wall outlet.******

1. Convert to Wireless Switch mode, Energy Monitoring and Power Automations are only available on Aqara Home app and are not exposed to third-party ecosystems.
2. To control the bidirectional motors, please turn on the INTERLOCK mode in settings.
3. Wireless Switch Mode, Energy Monitoring and Power Automations are only available in when the relay is powered by AC. Convert to Wireless Switch mode, Energy Monitoring and Power Automations are only available on Aqara Home app and are not exposed to third-party ecosystems.
4. Wireless Switch Mode Energy Monitoring and Automations are only available in when the relay is powered by AC.
5. Please note: the T2 supports maximum current of 10A as a sum of two hannels.
6. A wall box with a depth of about 60 mm the existing wall box is not deep enough. You can try to use a Wireless Remote Switch H1 or ultra-thin wall switch to control the Relay.

Enhanced Compatibility

After connecting to an Aqara hub, the T2 supports Matter through its hub and is compatible with a number of systems, including HomeKit, Alexa, Google, and IFTTT (Please connect the T2 to Aqara hub first). It allows traditional devices to become smart and seamlessly integrates with multiple third-party systems. Forget about the limitations of different protocols and platforms and enjoy a seamless and harmonious smart home experience.

*Aqara Zigbee 3.0 hub is required, and a Matter-compatible Aqara hub is required for Matter support.
**Home Assistant is supported via Aqara hub using Homekit Controller and Matter integrations.
***Please note: Convert to Wireless Switch mode, Energy Monitoring and Power Automations are only available on Aqara Home app and are not exposed to third-party ecosystems.

Making the existing devices smart

Transforming conventional devices into smart devices, including roller blinds, curtain motors, garage
doors, awnings, gates, and electric sliding doors. Automations and scenes that can be triggered by:

Banner Image

Unleash the Potential of Existing Devices

The T2 supports dual modes of dry contact and wet contact. In dry contact mode, the open and close pulse signal or the on-off signal can be selected to control motors, garage doors, rolling gates and other equipment. In wet contact mode, intelligent light control can be easily utilized without replacing your original equipment. By disconnecting a red jumper wire, the T2 can be switched from Wet Contact to Dry Contact Mode, which allows you to integrate a variety of devices.

*When controlling the garage door, ensure that there is no risk of jamming a person.
**To use the T2 as a Roller Shade Switch, the Interlock mode should be strictly enabled.

Convert to Wireless Switch Mode

Easily turn an existing wall switch into a wireless scene controller that doesn't need to change the batteries. For example, an arm button for your security system or a wired doorbell. Alternatively, you can connect one or two binary sensors*, and use the T2 in automations.

Smart doorbell

Wired doorbell + T2 = Smart doorbell

Smart switch

Ordinary switch + T2 = Smart switch

Safety is Fundamental

The T2 supports overheat and overload protection, which can eliminate the high current shock when the electrical equipment is instantly powered on, thereby ensuring the reliability and longevity of the equipment. When the equipment temperature is abnormal, or the power exceeds 2500W, the device automatically powers off to ensure electrical safety.*

* The installation of T2 is intended for users who are familiar with electrical installation. Advise that you contact a professional electrician and only use these instructions as a reference.

  • Power Off Memory
  • Electricity consumption monitoring
  • Low Idle Consumption

Power Off Memory and Energy Monitoring

The T2 comes equipped with a power off memory, which enables the device to remember its last state, in order not to turn the light on suddenly at night in case of a power cut.

Slideshow Image 1

T2 also features an electricity consumption monitoring function, which duplicate themselves, which enables an easy reset of the device automation, thus easing concerns regarding sudden power cuts or device resets.


*Please note: Energy Monitoring and Power Automations are only available in when the relay is powered by AC.
Convert to Energy Monitoring and Power Automations are only available on Agara Home app and are not exposed to third-party ecosystems.

Slideshow Image 2

Low Idle Consumption

Thanks to Zigbee wireless protocol, the Relay T2 features an ultra-low idle consumption. In a few years, the total cost of usage for a competing Wi-Fi relay, may surpass one of the Relay T2 significantly.
Aqara Dual Relay Module T2 vs Other Brands

Slideshow Image 3

Flexible Installation

The small size* T2 can be installed near light, behind switch or wall outlet and it also includes a DIN rail energy monitor**. Moreover, it is also compatible with both AC and DC power, This feature offers versatility, allowing users to install the device different settings and power sources.

*A wall box with a depth of about 60 mm is recommended. In case the existing wall box is not deep enough, you can try to use a Wireless Remote Switch H1, or a surface-mounted or ultra-thin wall switch to control the Relay.
**The Relay T2 is not a circuit breaker, and its maximum current of 10A does not allow it to control a big part of household circuits.

Banner Image
Garage door controller

Thanks to the dry-contact mode, the Relay T2 can be used to make your existing garage door smart*


IF You arrive within 500 meters from your home


THEN Open the garage door


*The garage door opener should be able to be controlled using dry contacts.

Aqara-Dual-Relay-Module-T2

Aqara Dual Relay Module T2

$46.99 CAD

View Details
Aqara Smart Hub M2

Aqara Hub M2

$74.94 CAD

View Details
Aqara_Door_and_Window_Sensor_P2

Aqara Door and Window Sensor P2

$39.99 CAD

View Details
Install it Behind Wall Switches and Outlets

IF Presence is detected


THEN Turn on a light switch or a heater connected to the outlet

Aqara-Dual-Relay-Module-T2

Aqara Dual Relay Module T2

$46.99 CAD

View Details
Aqara Smart Hub M1s

Aqara Hub M1S Gen 2

$74.99 CAD

View Details
Aqara_Presence_Sensor_FP2_ab47cc99-0c1f-4acf-9ac2-18eeab7e569b

Aqara Presence Sensor FP2

$109.99 CAD

View Details

Specification

Color

‎White

Compatible Platforms

  • Aqara
  • Apple Home
  • Alexa
  • Google home
  • IFTTT

Wireless Protocol

Zigbee

Hub Required

‎Yes(Aqara Zigbee 3.0 HUB)

Item Net Weight

‎0.13 Pounds / 60g

Operating Humidity

0-95% RH, without condensation

Operating Temperature

-10°C ~ 40°C (14°F ~ 104°F)

Product Dimensions

‎1.79 × 1.89 × 0.94 inches (45.5 × 48 × 24 mm)

Rated Parameters(AC)

100-250V, 50/60Hz/Max.10A, Max 2500W (Incandescent Lamp); Max. 1A, Max. 250W (LED, CFL Fluorescent Lamp); Max. 1A, Max. 1/4 HP (Motor) M.1.

Rated Parameters(DC)

24-30V: Max.10A, Max. 300W (Resistive Load); 30-60V: Max.1A, Max. 60W (Resistive Load);

Included Components

Dual Relay Module T2 × 1, User Manual × 1, DIN Rail Accessory × 1, Jumper Wire × 1

You May Also Like

 
Aqara-Dual-Relay-Module-T2
 
Aqara Smart Hub M2
 
Aqara_Presence_Sensor_FP2_ab47cc99-0c1f-4acf-9ac2-18eeab7e569b
 
Aqara_Door_and_Window_Sensor_P2

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jeremy Takacs
Love This

I installed this for a fluorescent light in order to automate the light in my laundry room. It’s very dark in there and when you walk in with a laundry basket, it’s hard to flip the switch. Using this with an Aqara motion sensor and it works every time, and I love it

M
Martin
Perfect

Fonctionne sans problème avec homekit, très versatile, utilisé pour contrôler une hotte de cuisinière.

FAQ